Services Slab Sawing Dust free sawing up to 40″ deep is available using gas or up to 15″ deep using electric equipment. 40 h.p. Electric saw cuts up-to 15” deep 7 h.p. electric saw can be carried down stairs, cuts up-to 8” deep CCB built sidewinder saw cuts up-to 24” from curb face. CCB built sidewinder saw cuts up-to 24” from curb face. CCB built deep saw cutting 29” deep, with 66” diameter blade. Maximum depth is 32” with 72” blade. Wall Sawing Walls can be sawn flush with adjacent surfaces such as floors or adjoining walls. Cuts up to 32″ deep can be made from one side, or a maximum of 64″ from both sides. Core Drilling Core drilling from 3/4″ to 60″ diameter, any depth. Larger diameter holes are available using our wire saws. Curb Sawing Openings in straight back or rolled curbs can now be sawn for a fraction of the cost of curb and gutter replacement. Wire Sawing Bridge Deck Sawing Bridge Parapet/Barrier Wall Removal CC&B designed 100 h.p. curb saw will saw cut flush with deck, up-to 19″ deep. Walls are cut into manageable sized pieces with CCB built, extra-length, deep saw. Median barrier removed for temporary traffic cross-over. Re-bar is cut from both sides allowing wall to be broken free at cold joint. Curb/sidewalk section is removed to increase roadway width and allow for two-way, partial width bridge re-construction. CCB built side-winder saw cuts up-to 24” over from curb face without use of ramps.