Indiana Waste Water Treatment Plant Y-wall
Description of the project
Reconfiguring existing waste water tanks required the removal of Y-walls without damaging the existing tanks.
First, cores were drilled at the limits of demolition, at each vertical cut location.
Then vertical cuts were wire sawn through the Y section.
Lastly, a horizontal wall saw cut was performed at the removal limit as pieces were rigged and flown out.
![indiana1 indiana1](https://i0.wp.com/concut.com/wp-content/uploads/2015/01/indiana1.jpg?w=717&h=474&ssl=1)
![indiana2 indiana2](https://i0.wp.com/concut.com/wp-content/uploads/2015/01/indiana2.jpg?w=355&h=235&ssl=1)
![indiana3 indiana3](https://i0.wp.com/concut.com/wp-content/uploads/2015/01/indiana3.jpg?w=355&h=235&ssl=1)